Request a Quote

Send Us Your Inquiry | Fast & Professional Quotation Support

SUBMIT

Bimetal KMTBCr26 Elbows: Where They Work Best in Abrasive Pipelines


Release time:

2026-11-17

Author:

Joyei

A short guide to bimetal KMTBCr26 cast elbows in mining slurry, power ash, cement dust and steel slag lines, with key selection tips.

In abrasive pipelines, the elbow is usually the first component to wear out. When slurry, ash, powder, or slag changes direction, particles hit the outer bend at high speed, causing concentrated impact and sliding wear. Bimetal cast elbows lined with KMTBCr26 high-chromium alloy are designed specifically for this weak point.

KMTBCr26 contains about 26% chromium. Its hard chromium carbides provide excellent resistance to cutting and gouging. Hardness can reach HRC 58–62. In a bimetal elbow, the outer layer is carbon steel for strength and weldability, while the inner layer is KMTBCr26 for wear resistance. The two layers are bonded during casting for a strong metallurgical bond.

Mining slurry lines. Tailings, concentrate, and cyclone feed lines carry coarse angular particles at high velocity. Bimetal KMTBCr26 elbows are widely used at pump discharges and direction changes. For coarse particles, a thicker lining and larger centerline radius help reduce impact wear.

Power plant ash handling. Fly ash, bottom ash, and coal pulverizer piping create high-velocity abrasive flow. Bimetal elbows are used in ash conveying and coal handling lines. Smooth internal geometry and proper lining thickness help extend service life.

Cement plant dust systems. Raw meal, clinker dust, and limestone conveying lines are highly abrasive. Bimetal KMTBCr26 elbows work well in moderate-temperature dust service, offering a good balance of wear resistance and structural strength.

Steel plant slag and dust. Slag discharge, sinter transfer, and dust removal lines combine abrasion with thermal load. Bimetal elbows suit abrasive solids at moderate temperatures; very high-temperature lines may need ceramic or heat-resistant alternatives.

Selection tips. Consider medium particle size, flow velocity, elbow angle, centerline radius, lining thickness, and connection type. Using the same KMTBCr26 material for elbows, tees, and reducers as for straight pipes helps maintain consistent wear protection across the whole pipeline.

Conclusion. Bimetal KMTBCr26 cast elbows combine a tough steel outer layer with a highly wear-resistant alloy inner layer. In mining, power, cement, and steel applications, they help extend elbow life, reduce maintenance, and improve pipeline reliability.

TAG:

Request Quote

Fill out the form using your details and our team will provide assistance and find the best solution for you.

SUBMIT